X Axis Aluminum Crossed Roller Translation Stages

TAM-651CFP25UU

High precision crossed-roller linear translation stages with black anodized aluminum bodies.

Bottom counter bore clearance holes are sized and spaced to accept both M6 or 1/4 size screws for mounting these stages down to a table.
Both M6 or 1/4-20 inch tapped hole versions available.
Both left and right hand adjustment versions available.
Multiple actuator options available. Standard micrometer, sub-micron micrometer, fine pitch screw.
All stages are equipped with a robust knurled head locking screw.

RoHS	Yes
CE	No
Guide	-
Attention	▶Micrometer brackets may extend above the top surface of some stages. Check drawings for detailed information. ▶Note that based upon payload size, rated travel could be reduced.
Stage Size	65×65mm
Axes of Travel	X axis
Micrometer Readable Resolution	-
Micrometer Position	Center
Moment Stiffness / Pitch	0.3″/N・cm
Moment Stiffness / Yaw	-
Moment Stiffness / Roll	0.25″/N・cm
Guide Method	Crossed roller
Travel Accuracy / Pitch	35″
Travel Accuracy / Yaw	25″
Travel Accuracy / Straightness	2.0μm
Running Parallelism	10μm
Travel	±12.5mm
Lead of Actuator	0.25 mm
Max. Moment Capacity / Pitch	4.9 N・m
Max. Moment Capacity / Yaw	4.9 N・m
Max. Moment Capacity / Roll	4.9 N・m
Weight	0.3kg
Primary material	Aluminum
Load Capacity	196 N ( 20.0 kgf )
Finish	Black anodized
Parallelism	30μm